Ergonomic slamlock handle DHFDD for drawers with bilateral development
General description of the ergonomic slamlock handle DHFDD – CHAMBRELAN:
This complete kit, ready for assembly, allows the installation of two locking handles on each side of the drawer. The drawer, guided by a double-development slide, is locked in a closed central position. It is delivered with installation instructions.
The overall dimensions of each handle are 365mm long, 40mm high and 38mm thick. They are made of black plastic and incorporate 6 threaded inserts for fixing. It withstands horizontal pulling forces of 50kg and 38kg when pulled up or down. The operating temperature range is from -40°C to +70°C continuously, but they withstand peak temperatures from -50°C to +120°C. For more information, please refer to the data sheet.
Supplied with two locking rods with a length of either 700 mm or 1000 mm, it is adjustable to drawer front panel widths ranging from :
- For 700 mm rods, drawer widths from 350 mm up to 1500 mm,
- For 1000 mm rods, drawer widths from 350 mm up to 2100 mm.
The connecting bar (to be cut to size) between the handle and the mechanism can optionally be supplied in 3 dimensions :
- 1000 mm for drawer depths from 150 mm up to 950 mm,
- 1500 mm for drawer depths from 150 mm to 1450 mm,
- 2000 mm for drawer depths from 150 mm to 1950 mm.
Ergonomic handle DHFDD options:
- Ergonomic handle only DH,
- Ergonomic slamlock handle DHF with lock in,
- Ergonomic slamlock handle DHVF with open and closed lock,
- Other rods lengths are possible,
- The handles can be supplied in yellow (RAL1023) .
These lock handles offer an ergonomic solution for installing a lock in the folded position on a drawer guided by CHAMBRELAN double-development telescopic slides.
Information about the ergonomic slamlock handle CHAMBRELAN DHFDD?
Contact the CHAMBRELAN sales team.
or view our editing tutorial on Youtube
Standard closed lengths
The characteristics given on this website correspond to standard manufacture or usual requirements. Our position as a manufacturer enables us to offer great flexibility in order to meet the most specific requirements.
This complete kit, ready for assembly to install a closed bolt handle on a drawer or door
It comes with the installation instructions. It is adjustable to any drawer up to 1.5 m wide. Stainless steel rods are easily cut to length and thus can be adjusted to specific dimensions.
Other dimensions are possible, do not hesitate to contact us.
These slam lock handles offer an alternative to built-in locks. They can also be used for indexing at different positions in a sliding system.
This handle can be installed on any type of door or drawer.
Recommended operating temperatures from -20 to 70°C.
The handle has been designed to be mounted in vehicles, including fire engines.
high temp use
- We do not recommend using this product outside the standard temperature range.