1. How can you choose the rail reference adapted to your application ?
When you order, please indicate :
- The linear rail reference and the length you need.
- The runner reference and how many runners you need.
When you order, please indicate :
Two runners per linear rail are enough to withstand the load.
In case of a lack of rigidity of the structure, you can add some runners to the rail.
Linear rails are delivered with transport end stops to prevent the runner from leaving the rail. Be careful: a temporary end stop can’t be used as a permanent end stop.
We advise you to choose long runners for heavier loads and short runners for lighter loads.
Drillings in linear rails are only done at a customer’s request. Fixing of linear rails is possible thanks to standard or specific drillings. The pitch or number of drillings can be adapted to your conditions of use.
It corresponds to the length of the rail, from which you subtract the runner length and 2x the position of one end stop.
The maximum length of linear rails is 3 metres. To increase this length, rails can be mounted next to each either with a straight cut or an oblique cut.
Copyright 2020 CHAMBRELAN - Legal terms - Sitemap